Test Meter

Description

• pH Meter - Measure Acidity or Alkalinity of the Soil
• TDS Meter- Include EC, TDS and Temp Function
• Premium Quality- High Accuracy and Quick Reading
• Easy to Use - Battery Included, Light Weighted, Easy to Read,
• Humanized Design - Hand-held Design for Portability and Convenience
• Wide Application -Water Purification Applications, Aquaculture, Hydroponic, Pool & Spa, Colloidal Silver, Water Treatment and so on
• Includes - 1 x pH Meter, 1 x TDS Meter, 1 x Protective Case

pH Meter Tech Spec

• Full measurement Range:pH 0 - 14
• Resolution :01 pH
• Accuracy :05 pH
• Calibration:Three Points Automatic Calibration Button
• Power Supply:2 x 1.5V LR44 Button Battery
• Dimension:1"x 1.2" x 0.7" 
• Weight:8 oz

TDS Meter Tech Spec

• TDS:0 - 9990 ppm (parts per million)
• Degrees Fahrenheit:0 - 176.0°F
• Conductivity:0 - 9990 µs/cm
• Accuracy:±2%
• Dimension:06" x 1.18" x 0.55" 
• Weight: 8 oz
• Tips: TDS = Total Dissolved Solids, which is any salt, metal or mineral in the water. Note: This ppm meter can't test sea water

Description

• 3-in-1 Functions - pH Tester: Measure Acidity or Alkalinity of the Soil
• 3-in-1 Functions - Soil moisture:Soil Watering Condition
• 3-in-1 Functions - Light Level:The sunlight the Plant Receive 
• Easy to Use - Small, Compact, Portable, No Battery Needed, Plugin and All Set
• Precise and Quick - The tester gives high accuracy and quick response
• Great Helper - Keep eye on your planter to ensure a safe and healthy environment

Tech Spec

• Weight: 0.01 Lbs
• Probe Length: 7.8"
• Tester Length x Width: 10.8"
• pH Range: 3.5-8 pH(3.5-6.5 Acid, 7 Nor, 7-8 Alkali)
• Moisture Range: 1-10 (1-3 Dry, 4-7 Nor, 8-10 Wet)
• Relative Light: 0-2000 lux (0-200 Low, 200-500 Low+, 500-1000 Nor 1000-2000 Hgh)

How to Use

• Step 1: Switch moisture/ pH/ light position
• Step 2: Inset the probe of the meter to the plants' roots about 2-4 inches
• Step 3: Adjust the position of the probe until the pointer on the dial swing slightly
• Step 4: After 10 minutes, note moisture/ pH/ light level in the dial
• Step 5: Remove probe from soil and wipe clean after each use

Tips

• Don't touch the stone or hard objects which are easy to damage the probe.
• Clean and wipe the probe after using.
• Don't insert it in the soil for a long time
• Only applied to testing soil. (NOTE THAT IT CAN'T TEST THE WATER)