English

Carbon Filter Manual

MODEL NAME

VSV-CFS4
VSV-CFS6
VSV-CFS8
VSV-CFS4-BK
VSV-CFS6-BK
VSV-CFS8-BK

SAFETY INFORMATION

Please read the following information carefully before installing and using. Failure to observe these safety instructions may result in serious injury and will release VIVOSUN of all liability and void all product warranties.

Check and comply with your local law and restrictions for additional safety requirements for the installation and operation of the product.
DO NOT use in the potentially hazardous environment such as flammable, explosive, corrosive, or wet atmospheres.
Make sure the safety systems are in place in case of any fire accident.
DO NOT spray water or use chemicals such as gasoline, benzene and diluent to clean the filter.
Follow these instructions; frequent cleaning and maintenance is recommended to increase the longevity of the product.
Ducted products must always be vented to outdoor areas.
The product pairs with devices with rotating parts. Be careful during installation, operation, and maintenance. Keep this product away from children.
DO NOT use the product if it is damaged when received. Please contact us for a replacement as this is considered a manufacturing defect.
Use with appropriate inline duct fans and accessories (air pipes, clamps etc.) or contact us for recommendations. Any improper use of accessories will void product warranties.
Check local authority requirements for proper disposal of waste and residues.

PRODUCT CONTENTS

VSV-CFS4/VSV-CFS6/VSV-CFS8

Image	Name	Box Number
	Carbon Filter	1 pc
	Prefilter	1 pc
	Hanging Straps	2 pcs

Image

Name

Box Number

e916efb0b657316dcf21d265a84612c3

Carbon Filter

1 pc

f5df4d5611438b13d357a81995500e35

Prefilter

1 pc

546ab0c172164d081b07863203a8e834

Hanging Straps

2 pcs

VSV-CFS4-BK/VSV-CFS6-BK/VSV-CFS8-BK

Image	Name	Box Number
	Carbon Filter	1 pc
	Prefilter	1 pc
	Rope Hanger	2 pcs
	Hanging Straps	2 pcs

Image

Name

Box Number

4e57b3ecf658ea44f7a7a40236c5d9f1

Carbon Filter

1 pc

9065593a8577a5324680ff20f4df8084

Prefilter

1 pc

42bfcb3ab9b2a6a6f54f9d4a27353f80

Rope Hanger

2 pcs

bba24ec54d230d0f13569aa2d0dedba0

Hanging Straps

2 pcs

KEY FEATURES

①

4''- 8'' (10.2cm-20.3cm)size is suitable for different types inline duct fans

②

Adjustable flanges and flexible installation

③

1200+ RC 412 Australian Virgin Charcoal for efficient odor control

④

High Airflow Inner And Outer Mesh

⑤

Prefilter included to prevent impurities and increase lifespan

⑥

Durable Long Service Life

DIMENSIONS

	VSV-CFS4	VSV-CFS6	VSV-CFS8	VSV-CFS4-BK	VSV-CFS6-BK	VSV-CFS8-BK
A	3.9''/10cm	5.9''/15cm	7.9''/20cm	3.9''/10cm	5.9''/15cm	7.9''/20cm
B	11.8''/30cm	15.7''/40cm	19.7''/50cm	11.8''/30cm	15.7''/40cm	19.7''/50cm
C	6.9''/18cm	8.9''/22cm	10.9''/28cm	6.9''/18cm	8.9''/22cm	10.9''/28cm

VSV-CFS4

VSV-CFS6

VSV-CFS8

VSV-CFS4-BK

VSV-CFS6-BK

VSV-CFS8-BK

3.9''/10cm

5.9''/15cm

7.9''/20cm

3.9''/10cm

5.9''/15cm

7.9''/20cm

11.8''/30cm

15.7''/40cm

19.7''/50cm

11.8''/30cm

15.7''/40cm

19.7''/50cm

6.9''/18cm

8.9''/22cm

10.9''/28cm

6.9''/18cm

8.9''/22cm

10.9''/28cm

INSTALLATION

STEP 1

Slip the prefilter cloth onto your filter to prevent from dust or other particles. Ensure the prefilter cloth cover the entire metal mesh of the filter.

STEP 2

Connect the filter to an inline duct fan of same size in an appropriate direction for different applications (see the following instructions of ventilation setup). Use ducting tap to secure the connection if necessary.

You can also connect the filter to a duct. Use a clamp to secure the connection.

STEP 3

Loop the two hanging straps around the flanges and a hanging pole as shown in the diagram.

STEP 4

Slip the strap through the inner ladder lock slot from the bottom. Pass the strap into the outer ladder lock slot from the top. Adjust the length of the completed loop as needed. Tuck the loose end through the center gap of the ladder lock to secure the loop.

STEP 5

Connect your filter to a inline duct fan or a ducting in your preferred method.

HANGING WITH ROPE HANGERS (VSV-CFS4-BK/VSV-CFS6-BK/VSV-CFS8-BK)

STEP 1

Loop the clips of the rope hangers around a hanging pole.

STEP 2

Connect your filter to a inline duct fan or a ducting in your preferred method.

STEP 3

Connect your filter to a inline duct fan or a ducting in your preferred method.

VENTILATION SETUP

OPTION 1

Place the duct fan and filter inside the tent. The filter should be connected directly to the intake end of the duct fan.

OPTION 2

Place the duct fan outside the tent and filter inside the tent. The filter should be connected to the intake end of the duct fan through the ducting.

OPTION 3

Place the duct fan inside the tent and filter outside the tent. The filter should be connected to the exhaust end of the duct fan through the ducting. Place the prefilter inside of the filter to increase its lifetime.

OPTION 4

Place the duct fan and filter outside the tent to save more growing space. The filter should be connected directly to the exhaust end of the duct fan. Place the prefilter inside of the filter to increase its lifetime.

MAINTENANCE

Regular maintenance is suggested. Make sure to turn off power and unplug the connected duct fan before each maintenance. We suggest replacing the entire carbon filter every 6 months of use.

SWITCHING THE FLANGES

We suggest switching the flanges so that you utilize the entire carbon bed and extend its lifetime.Remove the screws from the flanges and disconnect them from the filter. Switch the flanges and screw them back onto the filter.

Use water to wash the reusable prefilter cloth regularly to remove the dust and extend the filter’s lifetime. Do not wash the carbon filter – if it gets wet it may ruin the carbon.